The in bed wiring harness on your OEM 2017 Ram 3500 connects to the same circuit as your rear bumper 7-way. I recommend removing the T-connector from behind your bumper and inspecting the pins for anything bent. The use some dielectric grease like # 11755 to keep moisture and debris out and reconnect it. Do the same behind the plug in the bed and then test for function. If you don't have the 12V power at that point, then you will want to trace the wire to find the short or replace the... view full answer...
You'll need a new jack leg based on what you described. For a replacement you'd want the part # LC241845 for the driver side or part # LC241846 for the lead leg that is normally on the passenger side. view full answer...
The most likely causes to the issue you have are dirty trailer wiring connector pins which can be cleaned with sandpaper or a blown running light fuse for the trailer wiring under the hood of the two vehicle. view full answer...
It sounds like you have the Furrion Indoor RV Soundbar # FSB24SA2C-BL hooked directly to your T.V. The Furrion Indoor RV Soundbar # FSB24SA2C-BL is a passive soundbar, meaning it needs a separate power source, and can't be hooked up directly to your T.V.
Instead, you'll need to hook up the soundbar # FSB24SA2C-BL to an in-wall stereo like the Furrion RV Stereo # DV1230BL.
From here you'll use the HDMI cord to connect the stereo to the T.V., and then you'll take the output cables from... view full answer...
Go To Results